===============================================================================
Recent Additions - Emflon HTPFR filter for both Life Science (P) and Food & Beverage (W)
===============================================================================
Housing Selector Link ==> Click Here
INSTRUCTIONS
Click on the Sizing Liquid or Sizing Gas tabs up top
For Liquids
Housing - Use the pull down menu to select a housing. A value could be input manually by checking the box and entering a value.
Element - Use the pull down menu to select an element. A value could be input manually by checking the box and entering a value.
# of 10" Sections - Most filters will have their DP factor set in 10" sections.
- For smaller (4463, 7002, etc.) or larger (High Flow, Marksman, etc) the DP factors are set for their specific size so input 1.
- For porous metal filters the value should be in sq ft.
Liquid - Use the pull down menu to select a liquid. Once selected the Viscosity & S.G. fields are populated.
Values for these could be input manually by entering data in the two boxes.
Flow Rate Q - Enter the process flow and select the appropriate units.
Graph Units - Select the output units for the graph.
CLICK THE PROCESS BUTTON
For Gases
Housing - Use the pull down menu to select a housing. A value could be input manually by checking the box and entering a value.
Element - Use the pull down menu to select an element. A value could be input manually by checking the box and entering a value.
# of 10" Sections - Most filters will have their DP factor set in 10" sections.
- For smaller (4463, 7002, etc.) or larger (High Flow, Marksman, etc) the DP factors are set for their specific size so input 1.
- For porous metal filters the value should be in sq ft.
Gas - Use the pull down menu to select a gas. Once selected the molecular weight field is populated.
A value can be input manually.
Flow Rate Q - Enter the process flow and select the appropriate units.
Temperature - Enter the process temperature and select the appropriate units.
Pressure - Enter the process pressure and select the appropriate units.
Graph Units - Select the output units for the graph.
CLICK THE PROCESS BUTTON